I am putting down an epoxy floor with paint chips, but i put them on too thick, now i am short, what can i do

i am in the middle of working on my garage floor, but i spread the paint chips on too thick, and i am short, what can i doI am putting down an epoxy floor with paint chips, but i put them on too thick, now i am short, what can i do
go ahead a lay down what you have and after it dries come back to fill in the void areas, you will have to use sealer to make them adhere, talk to your hardware for info, good luckI am putting down an epoxy floor with paint chips, but i put them on too thick, now i am short, what can i do
Since the epoxy will take couple of hours to start setting , you could first with an old pair of running shoes walk on the floor at the far end and with a trowel pull back gently on the top just enough to work it towards the space that you are short of , and be careful no to slip , have some acetone handy to clean up after wards , and good luck.
Buy more.
Make more paint chips.Cover a piece of tinfoil or wax paper with a thin layer of paint,allow to dry and scrunch the paper so that the paint breaks into chips.You could also try your local craft store.Tell them your problem,and see what they have.